featured image 132

Can I Use 200 Amp Meter Socket For 100 Amp Service?

No. The meter only passes the current of the load. If the new mobile home has a 100A main breaker (which it should), all you need to do is run the existing 200A heavier wiring directly to that as long as it will fit in the lugs.

What is the difference between a 100 amp meter base and a 200 amp meter base?

only difference between the two is one is larger to allow for larger wire being used. it is very similar to the qo panel. one load center is rated for 100-125 amps and the next size up will work for both 150-200 amps.

How do you wire a service meter?


  1. Connect the Line Hot Wires. When the utility company connects the meter, the technician will bring the service wires down from an overhead mast or into the meter box through an underground feed.
  2. Connect the Load Hot Wires.
  3. Connect the Ground Wire.
  4. Connect the Neutral Wires.

What size wire do I need to run a 100 amp subpanel?


The cable must have a wire gauge sufficient to the amperage of the subpanel—a 100-amp subpanel requires #4 copper wires or, more commonly, #2 aluminum wires, for example.

What size ground do I need for a 200 amp panel?

Four AWG is the minimum grounding driver size for a 200 amp service. The grounding driver for this 200-ampere feed is a 6 AWG copper driver. If it has a grounding impedance of 20 ohms or more, you must drive a second rod with 250,56 of the 2005 NEC.

Is there a difference between a 100 amp meter and a 200 amp meter?

The main difference between the 100 amp vs 200 amp electrical panels is that the latter is larger in size. More circuits equate to being able to capture more of the electricity being delivered to your home by the power company.

How many wires do I need for a 200 amp service?

Wiring 200 amp service requires either #2/0 copper wiring or #4/0 aluminum or aluminum clad wiring. Which wire used is determined by the voltage drop and length of the wiring. Many electrical contractors opt to use #4/0 aluminum or copper-clad wire.

Where can I buy a 3 gang meter socket?

Hi Ron, for this 3-Gang 100 Amp Multi Position Meter Socket, if ordered on Homedepot.com, will be shipped and purchased as it is displayed on Homedepot.com when localized to your area. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

Is the Eaton 3 gang meter socket ANSI certified?

The unit is ANSI certified and UL listed for use as a meter socket for overhead or underground service applications. The socket has notched-wire saddle grips for good wire connectivity and interchangeable hubs. You will need Adobe® Acrobat® Reader to view PDF documents.

What’s the maximum amperage for a 3 meter socket?

Maximum Amperage (amps): 200 Maximum Amperage (amps): 400 Number of Gangs: 4 8ResultsNumber of Gangs: 3 Sort by:Top Sellers

How does an Eaton 100 amp meter socket work?

Sockets work with a circuit breaker distribution section in a rainproof enclosure for residential installations, rural service entrance, mobile homes, and for temporary power on construction sites.The Eaton 100 Amp Ring Overhead Meter Socket features a horizontal design and 3 gangs.

Leave a Reply

Your email address will not be published. Required fields are marked *