featured image 103

What Do You Call The Chimney Of A Train?

The chimney on top of a factory or a ship can be called a smokestack. Steam locomotives used smokestacks to release smoke and steam — the exhaust from the train’s smokebox. Without the smokestack, the pressure would become dangerously high inside the train, causing it to explode.

What comes out of the chimney on a steam train?

The steam locomotive exhaust system consists of those parts of a steam locomotive which together discharge exhaust steam from the cylinders in order to increase the draught through the fire.

What is the front of a train?


The front of a train is called a “locomotive.” The back of a train is called a “caboose.”

What is a smoke box on a train?

A smokebox is one of the major basic parts of a steam locomotive exhaust system. Smoke and hot gases pass from the firebox through tubes where they pass heat to the surrounding water in the boiler. The smokebox appears to be a forward extension of the boiler although it contains no water and is a separate component.

Why is there no chimney in the case of a locomotive boiler?

In this type of boiler we use the stack, instead of a chimney because as the name suggests it is a locomotive boiler means it is movable so that we don’t need to fit chimney in it, the flow of air over the stack removed the flue gases due to the pressure difference between the grate and the outside.

Why did steam locomotives smoke so much?

Darker or blacker smoke is an indication that small fuel particles (coal, wood, fuel oil, etc.) have made it through the firebox unburned and are therefore wasted. Light or nearly invisible exhaust means that the locomotive fuel is mostly burned and transformed into heat, carbon dioxide, water, and trace elements.

Where does steam come from on a train?

The water that makes the steam either comes from tanks mounted on the side of the locomotive or from a separate wagon called a tender, pulled behind the locomotive. (The tender also carries the locomotive’s supply of coal.) You can see a photo of a tender showing its water tank further down this page.

How did steam get through the chimney of a locomotive?

By the 1830s, steam exhaust was directed through a contracted nozzle called a blastpipe, so as to achieve the desired velocity through the chimney. Pressure drop through the blastpipe nozzle was subtracted from the boiler pressure available to the steam pistons.

What is the name of the smokestack in a locomotive?

Chimney (locomotive) The chimney (smokestack or stack in American and Canadian English) is the part of a steam locomotive through which smoke leaves the boiler.

How did chimney from 9-1-1 survive the accident?

In Season 1, he was in a car accident where a pole basically went through his forehead, and he survived that horrific accident. In Season 2, Maddie’s abusive and crazy ex-husband Doug (Brian Hallisay) stabbed Chimney several times in the stomach and left him bleeding out on the front walkway.

What is the back part of a train called?

It used to be a car for brakemen and conductors called a caboose or waycar modern freight trains have a Flashing Rear-End Device “FRED”,placed on the rear coupler of a train to monitor air-brake system integrity and air pressure. Also known as an end-of-train (EOT) device. Home Science

Leave a Reply

Your email address will not be published. Required fields are marked *